Compatibility of Cutting Ability and Compactness
High rigidity φ 100 mm The high output 15/11 kW spindle motor is mounted on the bearing spindle.
The slide adopts square slide and follows the robust mechanical structure from the conventional machine, so it can maintain heavy cutting ability and accuracy over a long period of time. The Z axis movement amount is 450 mm and a compact design with a machine frontage of 1,695 mm is realized while securing sufficient stroke for shaft processing. <Machine width equivalent to one turret machine made by TAKAMAZ.
Various Options Corresponding to Shaft Machining and Labor Saving of Setup Change
The tail stock unit adopts a new structure with high rigidity and demonstrates powerful thrust by hydraulic drive. The position of the tail movement is detected by the linear encoder, and it works in conjunction with the machining program, contributing to the reduction of the setup change man-hours.
In addition to being able to programmably change the workpiece support position by servo drive, the steady stop device can also change the setting that supports even higher load processing such as φ 120 mm spindle bearing, 18.5 / 15 kW spindle motor, MT – 5 specification tailstock It is substantial.
A large main slide door with an opening width of 500 mm is provided at the center of the machine, and in-flight work is possible in a wide space. Furthermore, a sub slide door of 500 mm in opening width is adopted on the right side of the machine where mechanisms such as turret and tail unit concentrate. One touch can secure a wide maintenance area.
High Affinity for Automation
We adopt a new 3-axis loader with a payload amount of 8 kg with handling optimized for shaft work. TAKAMAZ Along with high customization of peripheral devices, it is possible to respond to various user needs. In addition to securing the in-flight space that can be used sufficiently for other manufacturers and line gantry loaders other than TAKAMAZ, slant arrangements are also available for in-flight slides, making it easy to change the setup with a low conveying height.