• Space Savings in Production Lines

    Due to the turret and slide structure, the width of the machine with the loader transfer has been cut to 1,595 mm, the smallest in the class. (25% smaller than existing models) This reduces the workpiece transfer distance from the machine to peripheral devices, allowing the width of the production line to be reduced.

    Shorter Machining Cycles

    A 7.5/5.5 kW spindle motor is installed, and the increased power reduces spindle acceleration/deceleration times. (Comparison with previous models: Acceleration/deceleration time reduced 22% with max. speed of 4,500 min-1)

    High-speed Automation System Enables Speedy Mass Production

    A new 3-axis high-speed loader is installed. The loader was engineered in conjunction with the lathe, realizing an optimum transfer system for the machine to reduce cycle times. (The shortest cycle time for front and back machining with processes 1 and 2 is 17.5 seconds, an 8% reduction compared to previous models.)
    Ability
    Item
    XW-60
    XW-60M
    Unit
    Chuck size
    6 × 2(5 × 2 Opt.)
    inch
    Spindle bearing I.D.
    φ75(φ65 Opt.)
    mm
    Spindle speed
    Max. 4,500 (6,000 Opt.)
    min-1
    Type
    8-station turret × 2
    10-station turret × 2
    Max.stroke
    X:125
    Z:140
    mm
    Power tools
    Drill
    -
    φ13
    mm
    Endmill
    -
    φ13
    mm
    tap
    -
    M8
    mm
    Rapid traverse rate
    X:21 Z:18
    m/min
    Spindle motor
    AC7.5 / 5.5 × 2
    kW
    L × W
    1,595 × 2,005
    1,950 × 2,005
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Only 1,150 mm machine width Ultra-Compact Design

    The machine is a slim design with width of only 1,150mm and still comes with a 120mm stroke X-Axis and 230mm stroke Z-Axis. Even with a slim width, it is still designed with 450mm door opening. The machine accessories are placed in front or in accessible locations on the machine as emphasis to routine maintenance.
    Item
    Ability
    Unit
    Chuck size
    6
    inch
    Spindle bearing I.D.
    φ75
    mm
    Spindle speed
    Max. 4,500
    min-1
    Type
    8-station turret
    Max.stroke
    X:120
    Z:230
    mm
    Rapid traverse rate
    X:12
    Z:18
    m/min

    High Precision Structure

    The X-Axis has a pre-tensioned structure. As a result, dimensional variation due to thermal displacement is suppressed and a design with stable machining accuracy is achieved. In addition, the X-Axis slide is made larger resulting to a more robust slide. Furthermore, to find a flawless countermeasure for thermal displacement, thermal displacement phenomenon is analyzed by computer achieving excellent thermal stability. Repeatability test for 8 hours shows change of φ5 microns and only φ3 microns after 1-hour machine stop. (Based on TAKAMAZ designated cutting condition)

    Increased Operation Efficiency through Fully Loaded Features

    Safety program check done in advance with “Manual Handle Retrace Function”, retrieving data loss with “Automatic Data Backup Capabilities,” and “Counter Function” are some of the added features to improve maintenance, operation and ease of use.

    Environmentally Friendly Energy Saving Design

    As compared to the previous model, the spindle motor is upgraded to AC7.5/5.5kW but has much faster spindle acceleration and deceleration time. This contributes to power saving. The weight reduction for resource conservation and LED light adoption are contributing factors for power-saving and environmentally friendly structure.

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Loader cycle that will disprove common knowledge in loading technology

    This new 3-axis loader is even faster with a loading time of 6 sec.This machine is equipped with high speed shutter,reducing shutter open/close time into half(with open/close <0.5 sec).Aminimum 18 sec cycle time (OP1-2)is achieved with this new loader cycle idea.

    Pursuit of both cutting capability and precision

    The adoption of the box sliding for the slide,φ100mm maximum spindle diameter and 11/7.5kW moter.Installation of the spindle base cooling system for stable machining precision.

    Lower center of gravity・Space-saving design

    A compact 1,890mm width machine design ensuring a 150mm X-axis and 160mm Z-axis slide stroke with a 1,000mm spindle center height.Easy acces to the spindle chuck and work turn device and easy change-over.
    Item
    Ability
    Unit
    Chuck size
    8 × 2
    inch
    Spindle bearing I.D.
    φ100
    mm
    Spindle speed
    Max. 4,000
    min-1
    Type
    8-station turret
    Max.stroke
    X:150
    Z:160
    mm
    Rapid traverse rate
    X:24
    Z:24
    m/min
    Spindle motor
    AC11/7.5 × 2
    kW
    L × W
    1,890 × 2,140
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Achieve Space-Saving Comparable to 6-inch Class

    The machine width is 1,250mm. The floor space is 1.85m2 , about 23% less than previous model, making it the smallest machine with an 8-inch chuck among the same class in the industry. In our products, the space needed for [2] x [Set of Previous Model & Stocker] is enough for [3] x [Set of XC-150 & Stocker]. Arrangement of lines requiring only small spaces is possible leading to increased efficiency in operation and improvement in manufacturing.
    Item
    Ability
    Unit
    Chuck size
    8
    inch
    Spindle bearing I.D.
    φ100
    mm
    Spindle speed
    Max. 3,500
    min-1
    Type
    8-station turret
    Max.stroke
    X:175
    Z:250
    mm
    Rapid traverse rate
    X:18
    Z:24
    m/min
    Speendle motor
    AC 11 / 7.5
    kW
    L × W
    1,250 × 1,480
    mm
    Controller
    TAKAMAZ & FANUC

    Adoption of Rigid Slide

    Just like the other models, the Z-Axis slide applies square box-way slide that is known for rigidity. The X-Axis is designed for increased rigidity than previous model that can be used for heavy cutting.

    Energy Saving Machine

    As compared with previous models, there are 20% reduction on the spindle inertia and 36% reduction on the spindle acceleration and deceleration time (0-3,500min-1). In addition, X-Axis and Z-Axis have also reduction on the motor load inertia of approximately 8%. Per FEM Analysis for optimizing the design of castings by eliminating unnecessary materials, as compared to previous models, there is a 20% reduction of materials used. This is good for the environment. Through these measures, the power consumption without compromising machine functions and processing performance is reduced by 10%.

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Cutting Capacity up by 180%

    With a large diameter spindle of 120mm combined with an 18.5/15kW motor, cutting capacity is 1.8 times than that of our previous models. The machine is capable of heavy cutting with high torque even at low speeds needed for cutting of large-diameter flange-like work.

    Reassuring Stability for Mass Production

    A spindle cooling mechanism is built into the unit to minimize geometric change due from heat. An optional thermal displacement system is available. Dimensional accuracy and stability can be attained by combining the spindle cooler with the thermal displacement system.

    Zero Work in Progress Inventory is Possible with Front/Back Combined Cutting

    The live tooling is available for the 8-inch chuck machine. A maximum of 20 live tools can be attached and it will meet the needs for multi cutting processes. (200M: Live Tool Spec)
    Item
    Ability
    Unit
    Chuck size
    10 × 2
    inch
    Spindle bearing I.D.
    φ120
    mm
    Spindle speed
    Max. 2,800
    min-1
    Type
    8-station turret
    Max.stroke
    X:170
    Z:220
    mm
    Rapid traverse rate
    X:24
    Z:24
    m/min
    Speendle motor
    AC18.5/15 × 2
    kW
    L × W
    1,990 × 2,330
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Capable of Mounting Six Power Tools as Maximum

    This machine is equipped with high horsepower Power Tools that can perform a maximum of 10mm dia. milling. The ability to drill, tap and finish using one chuck and combined with possibility of performing variables and integrated process leads to flexible production.

    Extra Tools for 12 Station Turret Head

    The 12 station turret head is available with either standard turret specifications or the power tools specifications. The power tooling is designed with high speed through servo control and clamp controlled robust coupling leading to a stable high accuracy machining. The structure of the turret is also designed with cutting oil spray outlets for each tool for efficient cutting with coolant.

    Compact design continued on the XC-100

    Like the XC-100, the XL-100 is designed as multi-function compact machine. It has the same 1.85㎡ floor space as XC-100 and with additional milling capability. This machine is also an energy-saving design, and with excellent features to enhance the working environment.
    Ability
    Item
    Standard type
    Power tool type
    Unit
    Chuck size
    6
    inch
    Spindle bearing I.D.
    φ75
    mm
    Spindle speed
    Max. 4,500(6,000 opt)
    min-1
    Type
    8-station turret
    12-station turret
    Max.stroke
    X:120 Z:280
    X:120 Z:250
    mm
    Rapid traverse rate
    X:12 Z:18
    m/min
    Spindle motor
    AC7.5/5.5
    kW
    L × W
    1,360 × 1,360
    1,480 × 1,360
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Use of a linear turret substantially reduces idle time

    To answer the requirements imposed by severe operation time restrictions, the   [/fusion_toggle][/fusion_accordion]
    XD8 For More Videos Please Visithttps://www.youtube.com/watch?v=MWa5Bk1D2ac&t=22s machine is equipped with a linear turret that doesn't need to be indexed. The machine has also been given a simpler construction, which improves its rigidity and so allows more accurate machining.

    Newly developed high-speed air-driven precision chucking system

    To answer requirements for faster cutting, a highly rigid spindle construction with a φ65mm bearing internal bore and maximum speed of 8,000min-1 (Option) is adopted. In the standard specification, a pull-type collet chuck made by TAKAMAZ is fitted. However, chucks such as the T850 type outward-opening chuck that has been used previously can also be used, or alternatively a 5-inch power chuck could be fitted. ※Power chucks can be used with XD-8PLUS/XD-8TPLUS only.

    Integral tool holders for simple setup (XD-8 PLUS: linear turret)

    Integral tool holders has been adopted to improve rigidity, speed up setup changes, and save space. Due to the integral construction, chips are no longer trapped against the holder, and accidents that result from the trapping of chips are also prevented.
    Ability
    Item
    XD-8 PLUS
    XD-8T PLUS
    Unit
    Chuck size
    5 × 2
    inch
    Spindle bearing I.D.
    φ65
    mm
    Spindle speed
    Max. 4,500 (8,000 opt)
    min-1
    Type
    Horizontal linear
    6-station turret
    Max.stroke
    X:200 z:380
    X:140 Z:380
    mm
    Rapid traverse rate
    X:18  Z:24
    m/min
    Spindle motor
    AC3.7/2.2
    kW
    L × W
    1,580 × 1,550
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Larger Spindle Motor Output and Spindle Diameter

    The standard spindle motor output is 11/7.5kW (X-150PLUS: 7.5/5.5kW). As an option, 15/11kW is available and with this increase in capacity, 60% increase in cross-sectional area processing capacity is achieved. In addition, the spindle through diameter of φ65 is available as an option. With this option, larger diameter bar material can be cut.

    8 inch class Maximum Livetool Capacity (As compared with other models)

    With the motor output of 5.5/3.7/2.2kW, this machine is equipped with φ20 maximum tool size milling unit that is 2.5 times larger than previous models. This is better by 1.7 times the cutting removal capacity resulting in wide range of cutting application and significant reduction in machining.

    Longer Z Axis Stroke

    The floor space is the same as that of the [X-150 PLUS], but the Z-Axis stroke is 400mm(X-150PLUS: 330mm). This is approximately an increase of 20% that can correspond to long work shaft of up to 370mm.
                                            Ability
    Item
    Standard type
        Power tool type
    Unit
    Chuck size
    8
    inch
    Spindle bearing I.D.
    φ100
    mm
    Spindle speed
    Max. 3,500
    min-1
    Type
    8-station turret
    Max.stroke
    X:190                                Z:400
    mm
    Rapid traverse rate
    X:18                                            Z:24
    m/min
    Spindle motor
    AC11/7.5
    kW
    L × W
    1,600 × 1,535
      1,690 × 1,535
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Blount_XD-10i_sHigh-speed servo turret substantially cuts idle time.

    The rigidity of the 10-station drum turret used on the machine has increased through a uniform, balanced design, making it capable of continuous full operation. The turret rotation speed of 0.2 seconds per index is one of the fastest available.

    New 8-inch chuck specification.

    An 8-inch chuck has now been designed to complement the existing 6-inch specifications. This allows a response to more diverse needs.

    The addition of rotary tools permits process integration.

    The machine can be equipped with simple rotary tools capable of boring and milling on side faces.

    Compact design with integral loader for high-efficiency operation.

    The exceptional total balance that has been achieved by integrating the loader with the machine has lead no only to high productivity but also a broad range of other benefits including space savings and joint maintenance during after service.
    Item
    Ability
    Unit
    Chuck size
    6
    inch
    Spindle bearing I.D.
    φ75
    mm
    Spindle speed
    Max. 4,500
    min-1
    Type
    10-station turret
    Max.stroke
    X:120
    Z:520
    mm
    Rapid traverse rate
    X:18
    Z:24
    m/min
    Speendle motor
    AC5.5 / 3.7
    kW
    L × W
    2,310 × 1,695
    mm
    Controller
    TAKAMAZ & FANUC
     

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Loader workpiece machining capability with Z-axis stroke extension

    The standard Z-axis stroke specification is increased by about 40% from 550mm to 800mm.It can handle long shaft workpieces of up to 720mm, and provides a wide range of machining capability.

    Reduction of idle time by mounting a tailstock driven by a servo unit

    The hydraulic type driven tailstock on the standard machine is replaced with a servo driven type that is controlled with the change in the cutting program resulting to having a capability to handle different types of workpiece with significant reduction in cycle time.

    Improved Machine Operation

    In order to achieve improved workability when replacing chuck or workpiece as compared with the standard model,the length from the front door to the center of the spindle is reduced from 510mm to 450mm.
                             Ability
    Item
    Standard type
    Power tool type
    Unit
    Chuck size
    8
    inch
    Spindle bearing I.D.
    φ100
    mm
    Spindle speed
    Max. 3,500
    min-1
    Type
    12-station turret
    Max.stroke
    X:225 Z:800
    mm
    Rapid traverse rate
    X:18 Z:24
    m/min
    Spindle motor
    AC11/7.5
    kW
    L × W
    2,900 × 1,845
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • High-speed servo turret substantially cuts idle time.

    The rigidity of the 10-station drum turret used on the machine has increased through a uniform, balanced design, making it capable of continuous full operation. The turret rotation speed of 0.2 seconds per index is one of the fastest available.

    New 8-inch chuck specification.

    An 8-inch chuck has now been designed to complement the existing 6-inch specifications. This allows a response to more diverse needs.

    The addition of rotary tools permits process integration.

    The machine can be equipped with simple rotary tools capable of boring and milling on side faces.

    Compact design with integral loader for high-efficiency operation.

    The exceptional total balance that has been achieved by integrating the loader with the machine has lead no only to high productivity but also a broad range of other benefits including space savings and joint maintenance during after service.
    Ability
    Item
    Main spindle
    Sub spindle
    Unit
    Chuck size
    6
    5
    inch
    Spindle bearing I.D.
    φ85
    φ65
    mm
    Spindle speed
    Max. 5,000
    min-1
    Type
    12-station turret
    Max.stroke
    X1:150  Y:±35  Z1:330  X2:150  Z2:440
    mm
    Rapid traverse rate
    X1:18  Y:12  Z1:24  X2:18  Z2:18
    m/min
    Spindle motor
    AC7.5/5.5
    AC5.5/3.7
    kW
    L × W
    2,630 × 1,950
    mm
    Controller
    TAKAMAZ & FANUC
    PlayXY-120PLUS Video See More videos at https://youtu.be/hoP7ZFBNNLI  

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


  • Machine Equipped with a Sub-Spindle as Standard for Turning Complete Cut Work Pieces

    The X-120 can be equipped with a loader or with a bar feeder making it capable of complete turning of flange and shaft type work pieces at mass production level. As standard, a sub-spindle( 5 inch, AC3.7/2.2kW) is installed making it capable of high precision dual face turning by work piece direct chucking.

    Space-saving Design

    For manufacturing facilities located in high priced regions, improving the operation per unit area is indispensable. The X-120 provides a wide cutting range with maximum turning length of 300mm. This machine also features a space saving design with main body length of 1,680mm and maximum length of 2,000mm. The slide is inclined at 30-degrees making it suitable for efficient chip disposal. This prevents chip accumulation problems.

    Automation System

    "Reliable Automation System" is the theme that TAKAMAZ emphasizes to meet global needs. TAKAMAZ takes pride of the "ΣGH loader" that can be installed on the X-120. This gantry type servo loader has high speed of top level in Japan today. The servo driven hard of the loader can adapt to any motions of loading and unloading. In combination with a barfeeder , a parts catcher, and out conveyor, the X-120 can meet bar work piece turning.
    A:350
    Ability
    Item
    Main spindle
    Sub spindle
    Unit
    Chuck size
    6
    5
    inch
    Spindle bearing I.D.
    φ75
    φ65
    mm
    Spindle speed
    Max. 4,500(6,000 opt)
    min-1
    Type
    12-station turret
    Max.stroke
    X:170
    Z:300
    mm
    Rapid traverse rate
    X:18 Z:24 A:18
    m/min
    Spindle motor
    AC5.5/3.7(7.5/5.5 opt)
    AC3.7/2.2
    kW
    L × W
    2,000 × 1,630
    mm
    Controller
    TAKAMAZ & FANUC

    Your Details

    Let us know how to get back to you.


    How can we help?

    Feel free to ask a question or simply leave a comment.


This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.