Achieve Space-Saving Comparable to 6-inch Class
The machine width is 1,250mm. The floor space is 1.85m2 , about 23% less than previous model, making it the smallest machine with an 8-inch chuck among the same class in the industry. In our products, the space needed for [2] x [Set of Previous Model & Stocker] is enough for [3] x [Set of XC-150 & Stocker]. Arrangement of lines requiring only small spaces is possible leading to increased efficiency in operation and improvement in manufacturing.
|
Item
|
Ability
|
Unit
|
|
Chuck size
|
8
|
inch
|
|
Spindle bearing I.D.
|
φ100
|
mm
|
|
Spindle speed
|
Max. 3,500
|
min-1
|
|
Type
|
8-station turret
|
|
|
Max.stroke
|
X:175
Z:250
|
mm
|
|
Rapid traverse rate
|
X:18
Z:24
|
m/min
|
|
Speendle motor
|
AC 11 / 7.5
|
kW
|
|
L × W
|
1,250 × 1,480
|
mm
|
|
Controller
|
TAKAMAZ & FANUC
|
Adoption of Rigid Slide
Just like the other models, the Z-Axis slide applies square box-way slide that is known for rigidity. The X-Axis is designed for increased rigidity than previous model that can be used for heavy cutting.
Energy Saving Machine
As compared with previous models, there are 20% reduction on the spindle inertia and 36% reduction on the spindle acceleration and deceleration time (0-3,500min-1). In addition, X-Axis and Z-Axis have also reduction on the motor load inertia of approximately 8%. Per FEM Analysis for optimizing the design of castings by eliminating unnecessary materials, as compared to previous models, there is a 20% reduction of materials used. This is good for the environment. Through these measures, the power consumption without compromising machine functions and processing performance is reduced by 10%.
