Mounting linear motor to table movement has enabled high-speed inversion in short strokes, cutting down the grinding time. Table high-speed positioning precision ±1µm has been achieved.
Manufacturer: Mitsui High-tec
Model: MSG-525PC-NCL
Model Description: PC Controlled High Precision Surface Grinder
| Specification | MSG-525PC-NCL | ||
|---|---|---|---|
| Metric | Inch | ||
| Capacity | Table Work Surface | 250 x 550mm | 10 x 21-1/2" |
| Table Movement | 280 x 600mm | 11 x 23-1/2" | |
| Max. Height | 500mm | 20" | |
| Table | Table Speed (PC-NC) | 15m/min | 50ft/min |
| Table Speed (PCNCL) | 25m/min | 83ft/min | |
| One Revolution of Dial | 0.1/1/10mm | 0.0001/0.001/0.1" | |
| One Division of Dial | 0.001/0.01/0.1mm | 0.0001" | |
| Continuous Feed | 0-3000mm/min | 0-10ft/min | |
| Crossfeed | One Revolution of Dial | 0.01/0.1/1mm | 0.001/0.01/0.1" |
| One Division of Dial | 0.0001mm | 0.00001" | |
| Continuous Feed | 0-330mm/nib | 0-13"/min | |
| Min. Increment | 0.0001mm | 0.00001" | |
| Increment Feed | 0.0001mm | 0.00001" | |
| Head | One Revolution of Dial | 0.01/0.1/1mm | 0.001/0.01/0.1" |
| One Division of Dial | 0.0001mm | 0.00001" | |
| Continuous Feed | 0-300mm/min | 0-13"/min | |
| Min. Increment | 0.0001mm | 0.00001" | |
| Increment Feed | 0.0001mm | 0.00001" | |
| Wheel | Wheel Size | 205mm x 19mm x 50.8mm | 8" x 3/4" x 2" |
| Spindle Speed | 500-4000rpm | ||
| Motor | Spindle | 2.2kw/2P | |
| Crossfeed | 0.8kw | ||
| Vertical Feed | 0.8kw | ||
| Longitudinal Feed | Coreless Linear Motor 3kw | ||
| Guide & Drive | Crossfeed | Linear Guide & Ball Screw | |
| Vertical Feed | Linear Guide & Ball Screw | ||
| Longitudinal Feed | Linear Guide & Linear Motor | ||
| CNC | NC System | PC + Motion Control | |
| Control Axis | 3 Axis | ||
| Simultaneous Axis | 2 Axis | ||
| Power | Power Supply | 3 Phase 200-220V 50/60 Hz | |
| Power Required | 15kVA | ||
| Floor Space | Width x Length x Height | 3000mm x 2500mm x 2200mm | 118" x 98-1/2" x 86-1/2" |
| Gross Weight | 2300kg | 5080lbs | |