Built-in 2-sided bevel turntable, 3-axis (XYZ) dedicated loader Equipped with a slant structure on the machining side for good chip evacuation Automation compatible machine
| Slide Travel XxYxZ-Axis | 400x300x350mm |
|---|---|
| Height of Spindle Nose from Table | 240~590mm |
| Table size (WxL) | 480x360mm |
| Tables Max.Load Capacity | 70kgs (one side) |
| Table exchange method / exchange time | 2.3 (180゜turn) |
| Max. Spindle Speed | 12,000 min-1 |
| Rigid-Tap Speed | 5,000 min-1 |
| Rapid Traverse Rate X,Y,Z-Axis | 48, 48, 48 m/min |
| Shank of Tool Holders | BBT30+P30T-II |
| Tool Change Method | Double arm system |
| No. of Tool Pot | 25 pieces |
| Max. Tool Diameter x Tool Length | φ80x200 mm (Adjacent Tools Φ65 × 200) |
| Max. Tool weight(total) | 2.5 kgs |
| Tool Change Time Tool to Tool/Chip to Chip | 0.7/2.4 seconds |
| Max. Height of Machine | 2,285 mm |
| Min. Height of Machine | 2,185mm |
| Size of Machine (Width, Depth) | 1,700x2,700 mm |
| Machine weight | 3,700 kgs |
| NC unit | FANUC 0i-MF Plus |
| Power-supply voltage | AC200~230V 3 Phase |
| Power capacity required | 17.0 KVA |
| Positioning accuracy/Repeated Positioning accuracy | 0.005/+-0.003 mm |
| Machining Capability Drilling/Tapping | ADC12 φ34F0.2/M27x3.0 mm FC250 φ30F0.2/M24x3.0 mm S45C φ26F0.15/M20x2.5 mm |
※Due to improvements, some specifications and features may be changed without notice.